41
Bally Electromechanical / Re: Bally Slot Machine
« Last post by shortrackskater on Today at 09:00:10 AM »In my opinion, most EM issues cost nearly nothing to fix... it's a matter of proper troubleshooting; checking wiring, contacts, relays, solenoids, etc. I'm not speaking for myself! I struggle with these but you've already had enough similar circuitry experience to do this.
I've found slot stands on Craigslist at times. The easiest thing is just repurpose a heavy duty night stand or wooden file stand. If you search "slot stands" on the entire forum, you'll get some great ideas.
Most importantly, bolt that slot down on the cabinet!
As for the hopper, best thing is post a WTB in the Newlifegames Classifieds. They're on eBay occasionally but you'll need to figure out the model number you need. Any of those three members I mentioned will likely know. Actually, the model # should be in the manuals Badbaud referred you to.
Member wolftalk may chime in soon. He's got an extensive amount of documentation for the Bally EM as well.
I've found slot stands on Craigslist at times. The easiest thing is just repurpose a heavy duty night stand or wooden file stand. If you search "slot stands" on the entire forum, you'll get some great ideas.
Most importantly, bolt that slot down on the cabinet!
As for the hopper, best thing is post a WTB in the Newlifegames Classifieds. They're on eBay occasionally but you'll need to figure out the model number you need. Any of those three members I mentioned will likely know. Actually, the model # should be in the manuals Badbaud referred you to.
Member wolftalk may chime in soon. He's got an extensive amount of documentation for the Bally EM as well.