71
IGT Fortune II / Re: Fortune Two Joker Poker Issues
« Last post by Chris-socal on Yesterday at 02:58:27 PM »Are you sure the clicking isn't the mechanical credits and payout meters?
Welcome to the NewLifeGames.com message forum!
|
71
IGT Fortune II / Re: Fortune Two Joker Poker Issues« Last post by Chris-socal on Yesterday at 02:58:27 PM »Are you sure the clicking isn't the mechanical credits and payout meters?
72
IGT S2000 and Vision Games / setup hopper and tickets on my i dream of jeannie« Last post by armyaviation on Yesterday at 01:55:08 PM »just picked up a beautiful jeannie. I had a hopper and i wanted to make this coin in coin out. Having some trouble getting it the way i want but i dont even know if its possible. I would like it to pay out in coins from the hopper up to a certain amount. then i would like any amount over that value to add as credits. say 80 credits out hopper and anything over 80 to credits? is that possible. right now its coin in and credit mode. cant get creit mode to change even when i put split pay enabled. then when you cash out it goes out the hopper and not printer. i would like the cash out to be printer only if i can get it to pay out wins on hopper
73
General Chat, Slot Shop **Tech Talk** Welcome wagon and other stuff. (Off-Topic Post Welcome) / Slot, Bally« Last post by Wingnut1419 on Yesterday at 01:36:29 PM »Hello, i just picked up a Bally System 5000 Slot machine and am trying to figure what type of machine i have and how to test the power supply.
Model # S33L33-00. Any help would be appreciated. Wingnut 74
Bally Reel Games / Bally Slot Machine Model S33L33-00« Last post by Wingnut1419 on Yesterday at 01:32:16 PM »Hello, can someone please help me with my machine?
I just picked this up not working and would like help identifying this machine. Also how would i test the Power Supply? Thanks A lot Wingnut 75
IGT Fortune II / Re: Fortune Two Joker Poker Issues« Last post by cptdunsal on Yesterday at 01:12:08 PM »I tried sensitivity control but I might try to play with that a little more. Any idea about the clicking, why it's not there anymore? You really can hear it when playing credits. It comes from the upper left. I'm guessing manual meters are up there? I want to thank you for helping me out.
76
IGT S2000 and Vision Games / Re: Upgrade from 501 board to 504?« Last post by Newbooty on Yesterday at 12:37:49 PM »This board has a chip on it that say 97%. Will the 00017 still work to change percentage? Can you tell me if this is for sure a 501 board? I am just going by what is written on it. Is there a definitive guide on how to identify MPU boards?
Thanks 77
IGT Fortune II / Re: Fortune Two Joker Poker Issues« Last post by Badbaud on Yesterday at 11:32:43 AM »Have you been adjusting the sensitivity control on the front box of the comparator?
Considering the way the circuit is configured yo0u could prop the rake open with some folded paper and use it that way. In the F2 system the coin ion optic (or switch) do not communicate with the coin comparator. The comparator is only used to set the size of the coin. 78
WMS Williams Video / Looking for NXT3.2 Bios NBOT-00003-2010 (or even close)« Last post by sccarlso on Yesterday at 10:59:36 AM »Trying to get Ironman to work with a GamefieldxD screen but it just doesn't want to play nice. Newer OS's like H19.01 work perfectly on the machine. But ironman needs OS H18.02.
Bios NBOT-00003-2010 is listed for the specific game title: ME-WMS000055 WMS Iron Man S85E-000-1020 If I could flash my bios at least close to that rev, thinking it "might" address the issues. If you have any older versions of NXT3.2 bios please PM Thanks! 79
WMS Williams Video / Re: BB3 Games« Last post by sccarlso on Yesterday at 10:52:27 AM »Got the GameField touchscreen in, the hardware works great! A 32" vertical NEC display and the GF touchscreen. No crash when tapping the GF touchscreen!
What's driving me nuts is that games other than Ironman work perfectly. The dang OS 18.02 Ironman needs is just junk compared to H19.01. Won't calibrate the touchscreen properly so I still can't get past initial setup. Like it's trying to calibrate a horizontal screen when it's displayed vertical. So once calibrated in the H18.02 OS, it has no touchscreen test function or anything. So basically touch doesn't work after you calibrate in OS 18.02! The only way I got limited touch function is if I cleared and loaded just the OS H19.01, calibrates perfectly and Wonka loads and runs perfectly. Even took a pic of diagnostics > machine info to see that it's showing it is a GamefieldxD cabinet being detected. Apparenly it remembers the calibration from the 19.01 OS even after clearing and loading OS 18.02. But touch is still so off I can't complete initial setup. And if I try to calibrate in the 18.02 OS, then the touchscreen doesn't even respond afterwards. I can recalibrate over and over and the touchscreen always responds to calibration touches. But there isn't even an option to exit calibration! Or even a touchscreen test button as in OS 19.01. After touching the two hash marks in calibration it just goes back to the "turn key to calibrate touchscreen" over and over, like it isn't saving the calibration. I can only exit "sometimes" by closing the door switch to exit, but then if I go back into setup, no touchscreen response anymore at all. Can't believe OS 18.02 is that bad. Has to be something else going on here, but only occurs with ONE game title? Running out of ideas for why this one game is being so touchy. Cabinet is seen as a GameFieldxD, video is just fine. So just looking at more obscure potential issues. Found this reference, so I'm wondering if it could be due to the much newer bios? ME-WMS000055 WMS Iron Man S85E-000-1020 85E1020_OS3007_139111_2010.bin NSOS-000-3007 NBOT-00003-2010 SJUR-000139-111 GFxD The Bios listed is NBOT-00003-2010 and NSOS-000-3007 (OS 18.03) My current bios is NBOT-0003-2021v0.00.89 11 years between bios revs is a long time. But wondering if that could be a cause. If anyone has a Bios NBOT-00003-2010 (or even close) just to see if it makes a difference. Or even some kind of PSR (or whatever WMS calls them) with game specific information like hardware required and such that IGT has for its game titles. Do these even exist for WMS game titles??? If so, does anyone have a PSR type doc for this game ID for Ironman? Thanks! 80
IGT Fortune II / Fortune Two Joker Poker Issues« Last post by cptdunsal on Yesterday at 10:47:06 AM »My machine was working fine. Now it doesn't accept coins. This problem is in the Coin Compareitor. If I pull the teeth back the coin will drop through and register. Ive checked as much as I can but can't find the problem. It also stopped making the "clicking Noise" I would hear when playing coins.I pulled the hopper, pulled and reset the boards,Reset the game. I used to be a Slot Attendant back in the 80-90 but Not a Technician. I feel there is some connection with what I did and the current problem or just something simple i Might be missing. Maybe I jarred something. I don't know where to look for the coin mech control. Any help would be great. Thank you for taking the time to read my post.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |