WMS BB Signature Validation Error

[Tacman]

I need some help. I am trying to put a new game unto a wms BB1 but after I ram clear the machine and i put the game and OS in i get an error called "PREPART DSS SIGNATURE VALIDATION FAILURE"
I DONT KNOW WHAT TO DO AS IT IS NEW TO ME.
Trinidad
« Reply #1 on: 12-10-2010, 20:16:57 »
Usually indicates a bad OS "CF" card.
Will also occur if the game you need requires 512Megs of RAM and you have 256M in it. A 512Meg memory stick for a laptop DOES fit.
What Game title and OS are you trying to run?
KirkLasVegas
« Reply #2 on: 12-10-2010, 20:25:21 »
I am trying to run a game called high speed. It is 256 game and OS.
The CF cards i am using are card that were in working machines. I will try them with other games and see if it works. The ram is 512 but i am unsure about the bios but i will check
Trinidad
« Reply #3 on: 12-10-2010, 20:27:42 »
For "High Speed" you need BIOS Ver 2000........
You also need a 1800 or 1810 clear, 1350 wont do the trick

P.S. if you get a "Game Mismatch" READ THE MESSAGE CAREFULLY......
It will tell you the family of OS you have and what the game needs......
A series E1 will NOT work for a E1.11...ETC ETC.
If you cleared with a 1350, you have the Early BIOS....
KirkLasVegas
« Reply #4 on: 12-10-2010, 20:55:20 »
 I loaded the game on a 550 nxt conversion and it worked. i will look at the bios that the nxt has and the ram to ensure that they are the same.
I have the 1800 ram clear so that not the problem. I also loaded reel rich devils and it worked fine.
Hopefully by tomorrow i will have it sorted out
Trinidad
« Reply #5 on: 13-10-2010, 07:43:50 »
Usually not enough Ram (Cache) will not cause error codes, but will cause game to lock up when booting, the new games using newer OS's all require the v.2000 Bios, but seems hard to be accepted as the problem by users, but it is the problem.
BlueRidgeSlots
« Reply #6 on: 15-10-2010, 11:08:02 »
Kirk and Blueridge,
Thanks. The game loaded in another blubird. It was indeed the bios rom.
Trinidad