Printer Problem

[gposing]

I have a psa-66-0001n printer installed and when I try to do a test print from menu 4 coup shows up but noting prints.  I see there are dip switch settings on the bottom of the printer and #8 is the only one one. 
The cable that comes from the printer to the back plane board is only plugged into spare 232 port. 

[gposing]

Also, I do have mains with printer support installed.

[don275]

i have  bally s6000, with same printer and bill valitator,no coins or hopper,their are some stting you need to sed in 11d menu for printer,  same as yours,having problems as well,mine has 2 on ,my light on printer staus shows ready , make sure your blue auto feed is uo in let it go thru with tickets ,mine went through 3 tickets and stopped and light went green,but then when i went to print ticket, it locked up had to use clear chips to get the machine to play again,

[gposing]

i did get it working later yesterday.  three things that were wrong.  I had the wrong printer.  it was for a S2000.  Switches on the bottom were wrong on the correct one, bad wire harness from the back plane to the cable that went into the printer.     All up and running now.