How to remove cpu from backpane bb2 ?

[topgun911]

can anyone tell me the procedure on how to remove the cpu from the backpane  on a bb2?
Thanks
I have removed the two top nuts and the one inside the cpu in bottom right corner
And tried pushing that metal lever down but it doesn’t budge .
Not sure what I’m missing
Appreciate any help or where to look on site

[Jimise]

Pull up on the lever.

[tjlee]

make sure its not hooked before you push up

[topgun911]

Thanks all
Yes there is a small metal tab that is holding the handle down?
So do I pull lever toward me to get it out of that position than slide it up towards cpu?
Obviously I have door off cpu

[Harvs]

Thanks all
Yes there is a small metal tab that is holding the handle down?
So do I pull lever toward me to get it out of that position than slide it up towards cpu?
Obviously I have door off cpu

Pull up on the lever when unhooked and wiggle the CPU up..  I take the door off when I pop them out, gets it out of the way.

[topgun911]

Got it thanks again for all the help
Just to be sure it’s only the 3 nuts that either need to be loosened or removed in order to release cpu from backpane ? And then unlock and push handle up and wiggle cpu to release it
Just want to make sure I’m not missing anything

[Harvs]

Got it thanks again for all the help
Just to be sure it’s only the 3 nuts that either need to be loosened or removed in order to release cpu from backpane ? And then unlock and push handle up and wiggle cpu to release it
Just want to make sure I’m not missing anything

NO need to loosen any nuts, amigo. Just the handle to remove the CPU..