Author Topic: WHAT SLOT IS THIS? BARN FIND (Read 12130 times)

freesurfer · « **on:** August 03, 2014, 02:18:53 PM »

iTS A 809 she has missing parts? the female connection is correct? someone have picture of this slot?

zinda · « **Reply #1 on:** August 05, 2014, 03:25:23 AM »

Looks like you got yourself a little bit of work to do. You'll be pro at fixing these after you get this one going!

buybestslots · « **Reply #2 on:** August 05, 2014, 04:10:56 AM »

looks like someone added stop or hold buttons to it

The Fatman · « **Reply #3 on:** August 05, 2014, 07:31:16 AM »

Looking at the top area, looks like an 809 machine with stop buttons added. Doesn't look like the European model because the buttons are not placed correctly or the correct button used, like on a Sir Prize machine.
Dave F

The Fatman · « **Reply #4 on:** August 05, 2014, 07:34:25 AM »

In the bottom pic, I see a lot of wire nut and wires where the meters used to be. Also the addition of the red connector ... I really feel that it has been severely altered. If it were mine, I might carefully place it back in the barn, turn around and leave it there.
Dave F

buybestslots · « **Reply #5 on:** August 05, 2014, 08:25:12 AM »

can be a money pit

Quote from: The Fatman on August 05, 2014, 07:34:25 AM

In the bottom pic, I see a lot of wire nut and wires where the meters used to be. Also the addition of the red connector ... I really feel that it has been severely altered. If it were mine, I might carefully place it back in the barn, turn around and leave it there.
Dave F

Amechanic · « **Reply #6 on:** August 05, 2014, 10:18:46 AM »

It would make a great parts machine, but for restoring, I wouldn't want to take it on..

I would buy it for $50-$75 to have for it's parts.. That is if the glass is useable..

Gary

freesurfer · « **Reply #7 on:** August 05, 2014, 01:41:24 PM »

Many tanks guys i have to save her and give she dignita' in memory of the glorius past.
Trown on her like a dode on her frst girl the first night (only 4 repair not 4 sex)

i need picture about the correct reel cable she has not tag? is normal ? i think she is 1 of the first 809
what year she is ?

tanks and sorry 4 my bad english

OldReno · « **Reply #8 on:** August 05, 2014, 09:17:38 PM »

I still think it's a converted 742A. See if the top box looks like it has been added.
That's a LOT of work there....

Op-Bell · « **Reply #9 on:** August 05, 2014, 10:20:50 PM »

Something isn't right about the door. The proportion is wrong, it looks too wide for a 709. It has textured panels where it ought to have grooves. The reel glass is right for an 809 but the belly glass looks clear with a printed picture behind it. I don't like the look of this machine at all, it jest aint right.

Amechanic · « **Reply #10 on:** August 06, 2014, 12:00:32 AM »

I noticed the front door at first, but the back of the doors just doesn't look right as well. Very few wires, and its wrapped in tape instead of the normal string wrap.. It only has 1 door plug connector and different door hinges.. Beau plugs, reel shelve and handle gear box look correct tho? Very confusing machine? I thought the belly glass was a reflection from the camera, but at a second glance Op-Bell is correct again.

Gary

Op-Bell · « **Reply #11 on:** August 06, 2014, 12:53:05 AM »

I still don't understand what I'm seeing. That's clearly a wide-reel door. The photo isn't distorted because the picture on the belly glass is in the correct proportions, and I can see the glass is more than 2 times wider than it's high instead of the 15x8 of a narrow cabinet. But the mech in the bottom picture is a narrow one. Also, the cabinet is plain wood inside, no steel liner, and the door has lift-off hinges. That makes it way, way early, before there even were any wide reels. It's a hybrid of some kind. I doubt the parts even come from the same kind of machine. I'd want to see a photo with the mech in the cabinet, with the door partly opened so I could see the front of the door and the mech at the same time, before I'll accept that freesurfer isn't trolling us.

*edit* Looking again I'm convinced that picture 4 is a narrow cabinet. This door cannot possibly fit on it. And there don't appear to be enough wires going to the top box for that cabinet to be an 809.

buybestslots · « **Reply #12 on:** August 06, 2014, 03:53:59 AM »

I'm sure it right door if it had chrome frame on top box glass it would look right imo also it has a newer hopper aka snow hopper from mid 70,s , imo there s a lot of work to be done on something that might have parts from different machines

freesurfer · « **Reply #13 on:** August 06, 2014, 11:42:07 AM »

here we are i'm looking 4 person who start where others stop

i need help picture wiring diagram and what is correct and what is wrong

many many tanks 4 your help i have fix my IGT triple diamong with this site only rading the post of the others

its a very good site about slot

freesurfer · « **Reply #14 on:** August 06, 2014, 12:01:32 PM »

here yuo are other picture before clean and remove some rust

freesurfer · « **Reply #15 on:** August 06, 2014, 12:04:17 PM »

HOPPER REEL MEC CREDIT MEC

freesurfer · « **Reply #16 on:** August 06, 2014, 12:06:46 PM »

REEL MEC AND THE CUSTOM REEL STOP MEC

Op-Bell · « **Reply #17 on:** August 06, 2014, 02:27:01 PM »

'K, on taking measurements from those latest pics I see I was mistaken about it being a wide door. I guess the very first pic was taken from a high angle that foreshortened it. I still don't think that's an original door but it's unmistakeably an 809, a very old one, and it looks like it's all there.

freesurfer · « **Reply #18 on:** August 06, 2014, 02:38:23 PM »

MANY MANY TANKS 4 your interesting OP-BELL i tink is very old because if you see the picture the imprint mould of foundry is an old style i think but i don't now is the door is the correctbut there isn't a bally data base?

freesurfer · « **Reply #19 on:** August 06, 2014, 02:40:11 PM »

sORRY I HAVE FORGOT THE PIC

News:

NLG Site Navigation Menu

Author Topic: WHAT SLOT IS THIS? BARN FIND (Read 12130 times)