lobstermania help

[Nepa Coin Op]

im not that familiar with the platform this game runs on may you guys can help me out, I am trying to help a friend who picked one of these up... batt was dead. I replaced the batt for him and it wouldnt boot just lights all amber leds and goes no further........clear and set chips i have for 2000s are .. IVC00224 and Key 00045.....will these chips work with this game ? .... it did eventually boot but it takes a long time for it to boot up .... few mins I dont know if thats normal with this game or not ....now its giving a coin out jam error.... so apparently its looking for a hopper thats not there...... settings will have to be reconfiged Im sure.......will the set chip I have work ok with this game ??


thanks

[qbert]

Yes the chip set you have will work. 6-8 minutes boot time normal. Top screen is only touch screen during game play.
Otherwise it's a normal S2000 as far as button panel and clear/key procedure. Normal boot will show VFD "waiting for video display " top box will go through it's boot procedure (at least 5 minutes) then reels will spin and game should be ready to go.

[Nepa Coin Op]

Yes the chip set you have will work. 6-8 minutes boot time normal. Top screen is only touch screen during game play.
Otherwise it's a normal S2000 as far as button panel and clear/key procedure. Normal boot will show VFD "waiting for video display " top box will go through it's boot procedure (at least 5 minutes) then reels will spin and game should be ready to go.

this games total video, just one 17" up top.... we on the same page with that ?? im prob gonna have to go back in and disable the hopper then, apparently its looking for it

[qbert]

That would be an I-game not a Reel Touch. A little different,I will move it to the correct location.
Rich

[Tilt]

Your S2000 clear and key will not work in an I-game.  Post a picture of the mpu if you can as well as the base and gme chip numbers and I can tell you the correct key for it.  It's normal for I-games to take awhile to boot up.  The screen colors will change (solid red/green/blue/yellow..etc) as it tests memory and goes through the start up processes.