Bally Bios AVBBP26SIMPU-05

[Bandit15]

Needing some assistance - I was programming the progressives on my Bally Alpha S9000 and when I hit the save button, the machine froze up.  I had no choice but to shut it down and restart.  Now when I boot the system it locks at either verifying BIOS or sometimes will get to loading Kernel and just hang indefinitely.

I am runnimg AVBBP26SIMPU-05

If this is the culprit can I replace it with AVBBP26SIMPU-07 ?

[sixcardmark]

You need to clear it and start over.

[Bandit15]

It won't go past the bios check to load the clear card

[sixcardmark]

Which OS and clear card are you using with that bios?

[Bandit15]

335 clear card with 336-05 OS

I was able to get the clear card to run successfully, but it goes right back to Verifying BIOS ROM and just hangs

[sixcardmark]

Have you replaced all the batteries lately?

[Bandit15]

Yes all batteries were replaced before the initial clear.  The clear worked the first time and booted so I could setup machine.  Froze during progressive save and now I'm stuck at verifying BIOS ROM on initial boot