Progressive Help with Bally E2000

[Sunrise Side]

I have not checked this on my machine, but Dip switch #5 is for the attract feature for the lights on the top award glass and reel glass. The lights are to blink a pattern when the melody plays at idle/attract mode. Make sure your hopper fuse is AGC 5 amp.

[danatlvc]

The new hopper board came in & the machine now works perfect including the progressive. This machine had no sound with the reels spinning with me trying dip switch #3 thru #6. I finally discovered dip switch #1 turns the reel spin sound on which was nice surprise
Thank You All & Appreciate
Dan

[Amechanic]

That's interesting the dip switch 1 worked for the sound.. It usually controls the bell for jackpots and coins sometimes the ding you hear for each coin played.
So glad to hear it's now at 100%.. I'm going to make some notes for my repair log on your sound finds. You should make a short video of it working..  Dan, let me know about that old board per my PM..

Gary

[danatlvc]

I had all sounds except the reels spinning on the progressive machine. I picked up another E2000 machine for parts yesterday & got it working & it had the reel spin sounds. I swapped the sound boards & both the machines stayed the same with their sounds. I looked at the dip switch settings on the machine just in & #1 #2 #7 #8 were on, so I did the same on the progressive machine & got the reel sounds on the progressive machine  . I then turned #7 off both because the sticker says it's supposedly not used to see if you needed both #1 & #7 on for the reel sounds & both kept their reel sounds with just #1
Thanks to All here it's working 100% with full sounds & both progressives working
Thank You,
Dan

[Amechanic]

That's good information to have. The machine I had about a year ago didn't have any information on the dip switches.