IGT S plus sitdown machine

[lonnie]

I have splus sit down machine. was working ran out of quarters. I changed the coin in coin comparitor to a token about quarter size put tokens in hopper and now will not spit out tokens. How do I clean out the schute of the tokens so I can put quarters in. code error iss 3300 also a 0151 error....what is 0151 error mean? You help is appreciated.
Thanks,
Lonnie

[CVslots]

The 3300 error is telling you the hopper is empty and needs more coins. The 0151 is most likely telling you how may coins you need to payout....

Fill your hopper with coins and close the door....that should do it.

[therockinelvis]

What size tokens are you using. The .984 is slightly larger than a quarter which usually work in IGT hoppers. I have some slightly smaller than a quarter and the shelf wheel won't bring them around. You should be able to pull your hopper out and turn it by hand to observe what is happening. Maybe the knife needs adjustment or the tokens don't fit right in the escalator tube.

[slots4home]

I can tell you from past experience you cannot use any tokens for a slant top. They will always jam up.
Go back to quarters

[Jim]

the escalator part of your hopper has to be changed in order to work with .984 tokens. they are available, the casinos around here were 100% tokens before TITO, so IGT did in fact make those parts for that size token.    the easiest way to get the coins out of the escalator is to detach the escalator from the hopper base, usually 4 nut and bolts and 1 that holds the guide. then simply persuade them out the bottom using the open areas to insert something to aide pushing. there is no special alignment after  the escalator is removed, it simply lines up with the holes.

Hope this helps

Jim

[lonnie]

Thanks for all the help. I will take chute off and force the tokens out through the bottom and go back to quarters. I will let you know when I get cleared out.
Lonnie