Service Light Door open error

[tmiron]

OMG it worked!!!

[tmiron]

OMG IT WORKED!!!

Thank you !!!!!

And the light went off finally will activate the bv and see if that works

Thanks Again !!!

[tmiron]

Ok bill validator is taking 1’s but not 5 10 or 20 do I need to get a new chip for the bv?

Thank you!

[Stayouttadabunker]

Now you know one or BOTH of those optics are no good.
You will need new optics.
You can wire the purple and red wires to a cherry switch and the MPU computer will will assume it's closed physically, when the cherry switch plunger is pushed in.

As for your other question, that depends on what bill acceptor you have in there?
The old DBV145's only took small-headed bills...not the big heads.
You will need to get a DBV-200 for newer bills.
I'm guessing also a different vented power supply for it and the enclosure and bill box.
Ask vendor/member JIM for that stuff.
He's on the homepage of NLG under Midwest Slots with a phone number to reach him at.
Tell him I sent ya.
 

[tmiron]

There is no way to update the firmware on attached?

Thanks Tim

[Stayouttadabunker]

Nope...IGT and JCM stopped updating those ones a long time ago.
That DBV-45 is like pushing 30 years old, buddy. Old junks   
You need to get a hold of a DBV-200.
Send Jim a Personal Message.

[knagl]

Send Jim a Personal Message.

Get a set of door optics from him while you're at it. 

Congrats on getting the machine working.