1
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION
« Last post by David Walz on Today at 06:09:20 PM »Interior door assembly
Welcome to the NewLifeGames.com message forum!
|
1
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Today at 06:09:20 PM »Interior door assembly
2
Universal Reel/Video Games / Re: universal slot machine jam« Last post by Pitts256 on Today at 05:06:53 PM »Did you power up the machine while holding down the reset button on the CPU board? That should clear the memory and reset the board back to default settings.
Try this in the following order: 1) Power up the machine while holding down the CPU Master Reset button. Hold the reset button down for about 5 seconds then release. 2) Place the coin hopper back in the machine. 3) Push the yellow reset button one time. 4) Close the main door. 5) Turn the door key to the locked position. 6) Take a picture of the codes on the door LED display and post. 3
Aristocrat Video Gaming Machines / 540MVP Mark 5 setup help needed Sweet Liberty« Last post by edtruman on Today at 04:52:28 PM »I am setting up a machine to donate to a cancer benefit that I replaced the CPU board and the IO board
I could use some advice on setup, it is essentially doing a game change, but after clearing 3 way memory using 4.04.13, reinstalling U7 and U11 of the game software, power back up , it lists a series of errors watchdog, memory error Game EPROMs changed, ,memory error game machine options, Jurisdiction machine options, EEPROM CRC mismatch then I turn the audit key and am stuck with the Blue screen displaying Cannot clear static RAM and game cannot be played EEPROM error... run setchip I do have several versions of set chips I will add several pictures shortly Thank you for any help you can give me to get over this hurdle !!! 4
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Today at 04:29:39 PM »Front reel glass replaced with NOS. The pieces that were taped into place in the old reel glass were a PITA to clean the tape off, all of the three were IGT factory original with the numbers.
5
General Chat, Slot Shop **Tech Talk** Welcome wagon and other stuff. (Off-Topic Post Welcome) / Hello everyone! First WMS slot!« Last post by Terminator on Today at 04:23:09 PM »Hello everyone! I've long known about the forum but am just now joining! I've had some IGT in the past, but they've always been sold for one reason or another! I just got this guy today working 100% and am pretty excited - but I know nothing about WMS machines, so I'd love to learn more about what I purchased!
Additionally - my grandma's favorite game is China Shores - can that be added to this machine for her to play for awhile? Grandpa is in the hospital so I'd love to help keep her occupied! 6
IGT S and S-plus Reel Games / Re: Installed new S+ MPU board now there is no sound.« Last post by hornetgod13 on Today at 04:12:19 PM »After doing a lot of switching around between different MPU boards and different game chips. I have in fact confirmed that the sound chip in U49 must be there for sound to work regardless of which game chip is used. I do, in fact, need a sound chip. I will shoot you an email RB.
7
IGT I-Game and Game King / Re: IGT 3902 Board sound issues« Last post by shortrackskater on Today at 04:05:49 PM »Moved to IGT Game King from General Chat
8
IGT S and S-plus Reel Games / Re: Installed new S+ MPU board now there is no sound.« Last post by RB on Today at 02:37:12 PM »I have a few if you need one. You can borrow one from another board and confirm that it will make your board work.
9
IGT I-Game and Game King / IGT 3902 Board sound issues« Last post by dunginhawk on Today at 02:15:13 PM »Good afternoon..
I have a new to me 3902 board IGT multi game machine... It works well, Im happy overall, but the volume is CRAZY loud. In the volume settings i have all of them set to the lowest possible (while still being audible) and when the bonus goes off in a slot its so lout it rattles the walls. Even a normal video poker shuffle/BING sound is too loud. There is no way to make it quieter in the settings. Is there a hi-pot or anything on a board somewhere to edit this? I dont know what else to do. Thanks team 10
IGT S and S-plus Reel Games / Re: Installed new S+ MPU board now there is no sound.« Last post by hornetgod13 on Today at 01:58:15 PM »I'm using Sp1137. Sounds like it needs the U49 chip.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |