I figured out a how to use multi-denom and Stand alone progressive for each denom in use
This is how I did it
Denom Details $1,$2, $5, $10 (until I decide to clear it and lower the accounting denom)
I set up the controller part first 7.3.1
set it so your VFD shows this for each denom
Game 1 denom $1 Level 1
Stand Alone : Level 4
Game 1 denom $2 Level 1
Stand Alone : Level 3
Game 1 denom $5 Level 1
Stand Alone : Level 2
Game 1 denom $10 Level 1 This would be the default settings if you only have a single denomination setup
Stand Alone : Level 1
These are the level settings under standalone setup that I used in 7.3.3
Level 1 (for the $10)
Limit $500,000
Current $51,000
Percent 5%
Base $42,000
Level 2 (for the $5)
Limit $250,000
Current $25,500
Percent 5%
Base $21,000
Level 3 (for the $2)
Limit $100,000
Current $10,200
Percent 5%
Base $8,200
Level 1 (for the $1)
Limit $50,000
Current $5,100
Percent 5%
Base $4,200
I am sure you can reverse the levels and it may still work.
When I change denom on the machine the values change on the spectrum and also the add percent only goes to the current progressive level.