IGT S+ Triple Diamond 9 payl ine slot payout errors

[sixcardmark]

That makes perfect sense.  I use SP1271. 

[Jim]

here is some information about the strips for this game:  these strips will work for the 3 line, 5 line and 9 line game

strip numbers are: 84850800-7200-7300, or  84896000-7900-8000   or  (pictured)  84896000-6100-6200, these also have a F XXXX after the number. not back lit, all are sparkle.

Jim

[jay]

I mentioned somewhere in my thread that we had people on this forum that could just look at the strips and just know. 
That find on the game chip was brilliant ....


Kudos to all .....    I am always so impressed by the wealth and depth of knowledge on this site. 

[RMikeMcC]

Thanks Kevin and everyone else who have been providing all this insight and info.  I have certainly learned a lot these past several days. A will certainly be making a donation.  Regarding the SP chip, is the 1271 chip that you are using, Mark, for a Triple Diamond 9 line slot or doesn't that matter, just so it is one on the list Kevin provided?  I am more familiar with chips for pinball machines that are game specific and can't be interchanged.  Also, does anyone have suggestions as to where to purchase the chip?
Thanks again everyone.

[Stayouttadabunker]

I'd like to point out that in over 20+ years of working with S+'s, the SP1048 was one of the worst chips made by IGT for some reason.

It seems that whenever I had a major problem with a machine, the MPU had an SP1048.

Many times, I burned a new SP1271 or SP1274 (for Haywire type of games) and installed it, the problems went away.

Mind you, where I'm at, there's only one Triple Diamond 9 Line S+ on the floor but this thread peaked my curiosity.

So I went go check what was in it....sure enough, in it was an SP1271....lol

[rickhunter]

The S+ has two components to the software. The SP chip (Which is kind of like an OS) and the SS chip (which contains the theme specific reel information, paytable, etc).  The SP1271 will work with any theme that is compatible with a type 0, 1, 4, 5 and 19, with type 0 games supporting 9 paylines.  You could use this sp chip with any theme that is of those types.  If you go look at our S+ game bible, the game type is listed centered just below the theme's paytable ID.

Also have a look at various aspects of your machine, like game changes, enabling validator, etc.

http://www.newlifegames.net/spset/gamechange.htm

Game bible here.
http://www.newlifegames.net/igtbible/IGT%209%20Line/Game%20Library%20-%20S-Plus%20-%20Triple%20Diamond%20(9%20Line).htm

[sixcardmark]

Thanks Kevin and everyone else who have been providing all this insight and info.  I have certainly learned a lot these past several days. A will certainly be making a donation.  Regarding the SP chip, is the 1271 chip that you are using, Mark, for a Triple Diamond 9 line slot or doesn't that matter, just so it is one on the list Kevin provided?  I am more familiar with chips for pinball machines that are game specific and can't be interchanged.  Also, does anyone have suggestions as to where to purchase the chip?
Thanks again everyone.

I sent you two private messages this morning and have not heard back.  You will need a set15 chip also to activate bill validator after changing SP chip.

[RMikeMcC]

As recommended above, I ordered and installed an SP1271 chip in place of the SP 1048 that was on the MPU board and that has corrected all of the six through nine pay line payout issues the slot was having.  Thank you everyone for all the knowledge base info, recommendations and technical references that you provided.  I have learned a lot these past several days.  Also, thanks for the quick and courteous responses to all my questions.
Stay well!

[knagl]

Glad you got the issue resolved! Thanks for letting us know.