Author Topic: coin out jam (Read 1823 times)

therockinelvis · « **on:** May 30, 2021, 09:06:20 AM »

I have an "044 AVP Conversion with no coin equipment. Game was playing fine, had to do a handpay, resumed game play then got coin out jam. What now?

sixcardmark · « **Reply #1 on:** May 30, 2021, 09:16:04 AM »

If that's an 044 board, clear, key and install the printer.

therockinelvis · « **Reply #2 on:** May 30, 2021, 09:23:19 AM »

I have a key 28. What clear does it need?

sixcardmark · « **Reply #3 on:** May 30, 2021, 09:32:04 AM »

Does it have a flash board? 3902 adapter board? Not sure what you mean by avp conversion.

therockinelvis · « **Reply #4 on:** May 30, 2021, 10:09:58 AM »

Jim from Bettor slots said it had the 3902 board but was converted to the enhanced 044 AVP series board. IGT created this conversion at the same time they were putting out the AVP Trimline cabinets. Here is the board

sixcardmark · « **Reply #5 on:** May 30, 2021, 10:44:24 AM »

That is 044 w/flash board. Use a DEV00039 boot/key chip if you have one.

GK003047 is an 044 I-game.

therockinelvis · « **Reply #6 on:** May 30, 2021, 10:53:41 AM »

I only have key 28 that Jim sent with machine. I have used it for battery change

sixcardmark · « **Reply #7 on:** May 30, 2021, 10:56:05 AM »

That will work.

therockinelvis · « **Reply #8 on:** May 30, 2021, 11:06:59 AM »

So I guess I can remove the battery to clear the credits, then set everything up?

sixcardmark · « **Reply #9 on:** May 30, 2021, 11:12:04 AM »

If that clears the error then you still will have to key it to set it up.

therockinelvis · « **Reply #10 on:** May 30, 2021, 12:06:24 PM »

Big trouble now. Touch screen is way off. Can't exit. The touch is about an inch below the screen. Touching exit hit the save button. Can't exit for next screen

sixcardmark · « **Reply #11 on:** May 30, 2021, 12:12:27 PM »

Find the auto adjust button on top back of monitor.

sixcardmark · « **Reply #12 on:** May 30, 2021, 12:44:07 PM »

Jim, depending on brand of monitor there may also be a display setting for 3902 or 044. Change to 044 if it has that choice.

therockinelvis · « **Reply #13 on:** May 30, 2021, 12:45:44 PM »

Tried everything. Right bottom corner has nothing. See video. Do I need a touchscreen?

https://www.youtube.com/watch?v=rNewumXeY00

therockinelvis · « **Reply #14 on:** May 30, 2021, 12:51:23 PM »

I have no idea of what my limits are. Had to close door to get out of perifeal settings. Hopper and coin disabled. printer enabled. Game is playing

sixcardmark · « **Reply #15 on:** May 30, 2021, 12:58:55 PM »

You can go into diag and do a touchscreen calibration. Not sure that 5cent icon is touchable? I see you can get to different denoms another way. Screen looks lined up. Go into menu and set limits without credits no key required.

therockinelvis · « **Reply #16 on:** May 30, 2021, 01:10:41 PM »

Yes, normally touching the 5 will bring up the denom. to change. Glad to know I can change limits without keying again. I will set them and be good again. The right bottom of screen has been a problem ever since I got the machine. Jim and I spent about 30 minutes on the phone adjusting it. Worked most of the time fine. When I enter the touchscreen menu, I can't get to the white line adjustment, and none of the button on bottom work

sixcardmark · « **Reply #17 on:** May 30, 2021, 01:17:09 PM »

I have a few touchscreen controllers that look the same as your pic if you want to try one.

therockinelvis · « **Reply #18 on:** May 30, 2021, 01:26:17 PM »

I was just reading about these. A special tape for attaching them??. How much are touchscreens? Is the controller something different?

sixcardmark · « **Reply #19 on:** May 30, 2021, 01:33:41 PM »

That's for the touchscreen itself taped to front of the monitor. The controller is the board on the back of monitor.

News:

NLG Site Navigation Menu

Author Topic: coin out jam (Read 1823 times)