*Update* I pulled the backplane from my machine, went onto ebay and bought the eprom data chip that matched the numbers to the chip, de-soldered the old (I'm a computer guy and wasn't afraid to solder on the board lol) replaced it with the new eprom chip, put everything back together, inserted the CLR CHIP, self test button, cleared the memory, and installed the game chip, powered on and Viola! works like a charm...!!! went thru the hopper test till it ran out of the handful of quarters I had on hand and everything works great! not bad for an 80's machine. THANKS to everyone that helped! Much appreciated!
So my next question...
should I oil the hopper and it sounds kinda dry when It spins. how and where should I if it needs it. and directions or video perhaps on the best way?
Thanks Again.