Author Topic: IGT Pink panther (Read 7867 times)

therockinelvis · « **Reply #100 on:** January 07, 2023, 01:46:29 PM »

Oops my mistake ls520 so sorry

filounet · « **Reply #101 on:** January 07, 2023, 11:35:02 PM »

Hello, thank you all for your help and your precious answers

, I will order it today.
I had trouble finding this card with this reference but I understand better now

I have not yet seen where it is or what to disassemble to access it in the end for the moment

filounet · « **Reply #102 on:** January 08, 2023, 03:42:03 AM »

I found and I ordered thank you all and have a nice day

therockinelvis · « **Reply #103 on:** January 08, 2023, 05:38:15 AM »

I can't believe I don't have a picture of installed inverter. However, if you look at this picture you will see circled JP1. Place a jumper on it so when monitor is booting you see what stage it is in. Just above JP1 is a small ribbon cable that goes outside the case to the inverter. 2 Phillips screws and 3 mini plugs. Hope this helps. At least you can play the game now. If you enter the bonus no big deal. I think pressing the spin button declines offer and pressing the max bet accepts offer. You get 4 offers. The last one you have to take

therockinelvis · « **Reply #104 on:** January 08, 2023, 05:44:55 AM »

better picture. Click on image to enlarge

filounet · « **Reply #105 on:** January 08, 2023, 07:26:22 AM »

Thank you for your great help, here is the photo of the board in my machine, I hope to receive a new board soon to make it work normally

therockinelvis · « **Reply #106 on:** January 08, 2023, 08:21:59 AM »

I have save your picture for future help to others.

filounet · « **Reply #107 on:** April 24, 2024, 03:03:47 AM »

Hi,
I'm finally back after some health problems and as all is well I'm going to resume the post where I stopped, namely the change of the card to have the images from the LCD screen, the small board is now changed and I finally access the images, however I have new error messages that I didn't have before ☹
I obviously replaced the two button batteries on the MPU and on the video card that I had removed during my absence.
As a reminder, I have already repaired and completely restored many Bally machines but this IGT is my first and unfortunately I therefore have no spare parts to carry out tests if necessary.

The error messages are as follows:

•   CALL ATTENDANT
•   General Reel TILT
•   CLOSURE M

Sometimes the MPU lights are on and sometimes they are off
Thank you for your valuable help and any advice you can give me to finally get this machine working again.

filounet · « **Reply #108 on:** April 24, 2024, 03:04:31 AM »

The next

Stayouttadabunker · « **Reply #109 on:** April 24, 2024, 07:02:16 AM »

We need to see a picture of your bill acceptor.
A general reel tilt message is showing.
If the reels are slowly turning, open the door and turn the key once to stop the reels.
Then close the door and tell us what you see on the VFD display.

Your anniversary is coming up.
You've been working on this Vision machine since June of 2021 ??

filounet · « **Reply #110 on:** April 24, 2024, 08:27:09 AM »

Indeed, I had to leave the slot machines and everything else for several months but now things are better so I'm picking up where I left off with the Pink Panther.
So the rollers do not rotate at all and I have the following different error messages
I took several photos and tell me if I need to take more?
The MPU card is lit with only the top lamp in orange
Thanks a lot

filounet · « **Reply #111 on:** April 24, 2024, 08:28:22 AM »

La suite

filounet · « **Reply #112 on:** April 24, 2024, 08:29:32 AM »

The next 2

filounet · « **Reply #113 on:** April 24, 2024, 08:30:15 AM »

The final

Stayouttadabunker · « **Reply #114 on:** April 24, 2024, 10:06:57 AM »

"Bill Validator Hardware Error".... you have an IBA4 bill acceptor.
I believe that was called an "International Bill Acceptor" made by JCM (Japan Cash Machine) and from the label, I can see that it was made in December of 2004....sooo...that thing is going on 20 years old now.
Unfortunately, I have never seen one of those as I'm in the United States.
I'm sure someone has some info relating to that model but also, that is pretty old too.
I will try to dig around and see what I can find on that BV.

For now, try doing the simple things such as re-seating the cash box and opening & closing the main door a few times.

filounet · « **Reply #115 on:** April 25, 2024, 08:40:04 AM »

It works perfectly, I moved the door contact by 3 millimeters and it works perfectly, thank you for your help

Stayouttadabunker · « **Reply #116 on:** April 25, 2024, 01:23:27 PM »

It's all working now?

filounet · « **Reply #117 on:** April 25, 2024, 09:07:59 PM »

Now I'm just looking for how to reduce the sound of the pink panther video? Thank you for your help

Stayouttadabunker · « **Reply #118 on:** April 26, 2024, 05:54:20 AM »

Open the door, press the little white Test button on the power switch box...it might be behind it too?
Then watching your LCD screen in the Menus, that would be in the "LCD Volume" as you scroll thru the pages.

News:

NLG Site Navigation Menu

Author Topic: IGT Pink panther (Read 7867 times)