spin ferno / jackpot sevens rg number

[Retro tech repair]

i was given some parts and in the parts was kit for a spin ferno and an r board with an sb101441. i know the sb number from a jackpot sevens i had a wile back and the paytable is the same. the part i am not sure of is will an rg000013 work with that sb. if anyone asks it also has an rb000003 on it and this also matches what i have written down for the jackpot sevens. i don't want to put effort into building a machine for this kit if the software is not correct.

[Harvs]

RG000013 along with SB101441 will work for 'Spinferno FreeGames'. It's a clone of 'Jackpot 777 FreeGames' like you said (same pays).

[Retro tech repair]

ok thanks for the info i now all i have to to is find out if the board is good.

[Harvs]

ok thanks for the info i now all i have to to is find out if the board is good.

I may be able to come up with another board if yours doesn't work. Just let me know.


 

[Retro tech repair]

im swamped with work at the moment but first chance i get i will test the board in another machine.

[Retro tech repair]

Thanks again for the help tested the rboard yesterday and it does work.

[Harvs]

 

Thanks again for the help tested the rboard yesterday and it does work.

An odd thing I noticed when I built 'Jackpot 777' was when there are 0 credits on the machine, the bulbs light up bright after 30sec or so and stay that way until credits are added. Then they dim back down to normal brightness.. I ended up installing LED bulbs to avoid melting the bulb housings over time. Maybe it was just my dumba$$ with wrong bulbs or some shat, but report back if that's the case with yours.

Thanks

[Retro tech repair]

My jackpot 777 came with led everything and i don't remember this problem. the machine i tested in had incondecent reel bulbs and led buttons. The reels i did notice lit at full brightness with no credits on it. The buttons disnt lite at all but they do with my butterfly sevens board in it. I did not do a full clear and key tho just swaped in a blank motherboard eeprom and pulled the mpu battery for a bit. so i just assumed it was that.

Edit
Just checked what kind of reels the strips are mounted too they are on led reels. Maybe this game does some kind of pwm controle for the lights.

[Harvs]

My jackpot 777 came with led everything and i don't remember this problem. the machine i tested in had incondecent reel bulbs and led buttons. The reels i did notice lit at full brightness with no credits on it. The buttons disnt lite at all but they do with my butterfly sevens board in it. I did not do a full clear and key tho just swaped in a blank motherboard eeprom and pulled the mpu battery for a bit. so i just assumed it was that.

Edit
Just checked what kind of reels the strips are mounted too they are on led reels. Maybe this game does some kind of pwm controle for the lights.

I didn't have LED reels to use so went with the bulbs. I didn't want any melting going on.. Odd that it does that..

My buttons were fully functional. That game only uses 1 top row button seeing you can't choose the lines to play, only the max bet. I ended up removing the top buttons and used a blanking plate.

[Retro tech repair]

Ya i do remember on the one i had you could only bet 20 lines and i think it was 1 3 and 5 credits per line.