Author Topic: How do I open up the 32 inch part of a Bally 22/32 machine (Read 899 times)

sakwilla · « **on:** March 03, 2019, 01:45:22 AM »

Hi,
Im trying to use my Bally 22/32 machine as a Bally 32 and was told to connect the white cord (DVI) with an adapter into the 32 inch screen. Went to do this and realised after opening up the 22 inch screen component I dont know how to release the 32 inch screen above. Can any help me? THanks in advance

rydiez · « **Reply #1 on:** April 06, 2019, 04:52:53 PM »

There is a black frame around the monitor. The top portion of the frame is a rounded piece of chrome. Push up on that chrome piece with your thumbs to release the frame. Remove it from the machine. You will now have access to a lever on each side of the screen. Pull on those to release the screen. It will then hinge towards you.

News:

NLG Site Navigation Menu

Author Topic: How do I open up the 32 inch part of a Bally 22/32 machine (Read 899 times)

sakwilla

How do I open up the 32 inch part of a Bally 22/32 machine

rydiez

Re: How do I open up the 32 inch part of a Bally 22/32 machine