bally 5000 ? clear/psudo coin switch

[puckhead]

 i originally posted its  a bally 5500, i think now its a 5000 . two board, mpu and IO .   it has a pggyback board on the mpu.  power supply 110  input header had all 3 solder connection cracked on the board. the board mounting put pressure on the wires going in, and it cracked the joints. also replaced varta battery.  want to do a clear. manual says use psuedo coin button on door. cant find it at all.  there are two buttons on mpu , test and rrset from left to right? the cover is missing.  when it boots, both leds come on solid for a second, then they both have a flicker in unison . displays are mostly 8's.  where do i go from here?

thanksps- no keypad available
update: after replacing the varta, its only the right led on the mpu flickering. also, i think i found the psuedo coin button. on a board with the meters. there is also a toggle next to it.  i tried pressinf it with the i/o board out, no help. now im stuck. still mostly 8's in the dispalys, no changes with any button pressing
thanks

[Sunrise Side]

The  battery should be replaced with a 3.6 v Lithium.  Not a rechargeable Varta.

[puckhead]

that wont solve my immediate problem.

[Badbaud]

See attached, maybe they will help.

[puckhead]

soon as i saw the instructions, i knew i screwed up when i wrote its a 5500.  i beleive its a 5000.  he is the correct orig post :
 i originally posted its  a bally 5500, i think now its a 5000 . two board, mpu and IO .   it has a pggyback board on the mpu.  power supply 110  input header had all 3 solder connection cracked on the board. the board mounting put pressure on the wires going in, and it cracked the joints. also replaced varta battery.  want to do a clear. manual says use psuedo coin button on door. cant find it at all.  there are two buttons on mpu , test and rrset from left to right? the cover is missing.  when it boots, both leds come on solid for a second, then they both have a flicker in unison . displays are mostly 8's.  where do i go from here?

thanksps- no keypad available
update: after replacing the varta, its only the right led on the mpu flickering. also, i think i found the psuedo coin button. on a board with the meters. there is also a toggle next to it.  i tried pressinf it with the i/o board out, no help. now im stuck. still mostly 8's in the dispalys, no changes with any button pressing
thanks

[Badbaud]

Here are some Bally 5000 clear instructions. The other option is to use clear chips.
A keypad will clear it also but the board has to be working 100%.
Hand made keypads are sold on my website.

[Sunrise Side]

I don't know which  battery goes into the 5000 Bally, so disregard my previous reply.

[Badbaud]

There is a Lithium battery mod recommended by Bally but I can't post the instructions here because NLG says 1,028k is to large.
The mod eliminates the leaking NiCad battery and allows the use of a CR2032 button in a socket.

[puckhead]

j14 has multiple pins, see pic.   the jumper is where it was when i pulled the board, i havent moved it.  where does it go for the clear, and where does it go back when done?  also, next to the psuedo coin button is a toggle switch. does it matter what position its in? im guessing its the coin acceptor enable switch?

thanks

[Badbaud]

See attached for jumper clear setup.
That is the pseudo coin button on the door distribution board.
I do sell a complete manual on the S5000 wiring and board testing on my website.