Author Topic: BB2 To BB3 With BB3.5 CPU (Read 817 times)

dragster73 · « **on:** June 04, 2021, 02:53:03 PM »

I am installing a BB3 CPU into a BB2 cabinet. I have got the game installed this far however the screen size is not correct. See Photo. Any recommendations?

dragster73 · « **Reply #1 on:** June 04, 2021, 02:59:41 PM »

The bottom monitor is a Wells Gardner

rickhunter · « **Reply #2 on:** June 04, 2021, 04:09:43 PM »

What game and OS? Some BB3 OS versions have issues with bb2 monitor timings as they were never really meant to run on them.

idesign · « **Reply #3 on:** June 04, 2021, 04:39:52 PM »

You indicated that your are using a 3.5 CPU which usually comes with a different video card than a 3.2 CPU. That may be causing the problem. What is the part number on the video card?

dragster73 · « **Reply #4 on:** June 04, 2021, 04:58:53 PM »

I do not know where to look for the video card version.

rickhunter · « **Reply #5 on:** June 04, 2021, 06:37:51 PM »

There's a green sticker on the side of the heatsink for the video card. Post a photo of that here. Also you do know the Wonka version you are trying to load is a Wide Area Progressive version that does not run stand-alone.

idesign · « **Reply #6 on:** June 05, 2021, 05:33:56 AM »

Some video cards had white labels on them too instead of green. Just to be clear, there were 2 different versions of the video card, one of which is not as compatible with some of the games. However, like Rick says, that game card you have is a WAP version of the game so not going to work unless you have the controller.