bally game maker

[slotmandave]

How do you run a clear on a bally gamemaker?

[chuck300x11]

With the machine off, remove the game chip at P10. Replace with clear chip. Be sure to have the notch facing the proper direction. There are two banks of dip switches at the upper left of the board. Change switches 7 and 8 on the upper bank to the up position. Replace board and turn machine on. Machine will tell you when it is clear and ask you to remove the clear chip and to put the game chip back. Be sure to turn the machine back off before removing the board. After you put the game chip back in, change switches 7 and 8 back to the down position, replace the board and turn the machine back on. Do you have the set up instructions? You will need those as it is a very specific procedure to reset the settings.