21
WMS Williams Video / Re: Button lights not working
« Last post by dragster73 on Today at 03:11:24 PM »Check these LEDs on the Backplane board
Welcome to the NewLifeGames.com message forum!
|
21
WMS Williams Video / Re: Button lights not working« Last post by dragster73 on Today at 03:11:24 PM »Check these LEDs on the Backplane board
22
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Software Sale Aristocrat, WMS, Bally, Konami KP3 (Updated 18May2024)« Last post by gunnerbill on Today at 02:59:23 PM »Update: Added aristocrat game for sale: Lightning Link/Cash - Heart Throb LL (1.01-63838)
23
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Today at 02:37:28 PM »I'm at a loss I have gone through every wire checking its location, sometimes twice, just to make sure that both the: wire to plug orientation, and the wiring is 100% correct. I must have put 16 hours just into this issue. 24
Bally Electromechanical / Re: bally 1090-106« Last post by DavidLee on Today at 02:36:04 PM »The first coin in actives the re-set coil in the middle
Which in turn re-sets the multiplier or coin unit. This closes a switch so the step up actives with the next coin. Manually reset the coin unit. See if it will work then. If not. Insert 1 coin then manually step the unit up once. Then try another coin. 25
WMS Williams Video / Re: Button lights not working« Last post by Coloradonewbie on Today at 02:34:21 PM »Where is the best place to check the voltage. I don't seem to be getting anything at the bulb.
26
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Today at 02:26:26 PM »I'm at a loss
27
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Today at 02:13:34 PM »Grey and Grey/ Yellow are both a logic ground according to the drawing. That belongs to the power. 28
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Today at 02:06:50 PM »Getting closer to getting the slot machine working, I built a door optics override device. This way I can work on the machine with the door open, and the Molex connectors are exactly the same.
29
WMS Williams Video / Re: Button lights not working« Last post by dragster73 on Today at 02:04:01 PM »You'll need to check the voltage to the lamps.
30
WMS Williams Video / Button lights not working« Last post by Coloradonewbie on Today at 01:06:57 PM »Williams bb1 sherwood treasure.
Button lights not working. I tried replacing harness and even hooked up a working deck to it so I know it's not the bulbs or harness. Could it it be a power thing or the backplane. Any help appreciated Ken |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |