Gambers Bonus by United Coin - Clearing

[danatlvc]

I've cleared many Game Makers, but never the Gamblers Bonus or Select version (the same different name) put out by United Coin. The games & Mains are theirs & different from a standard Game Maker & this one has a Debug chip in socket 10, but other then that it's a Game Maker. I've also had a few with no Debug chip in them, but never had to clear
I went to ram clear this machine with the Debug & also with a regular Game Maker clear chip & get the setup as shown below. I then select & then reset dip switches & turn back on. Then I do a hard & soft calibration of the touchscreen & then the machine comes up with no games? It does not give me the option of selecting games & denominations etc. I've tried this with a few boards with the same results. These machines are setup a bit different & I'm missing something in clearing, dip switch or something to get game setup? I've tried dips 7 & 8 - 6,7,8 & also all 8? Any help would be appreciated to get it back up. Thanks

[doyson49]

hi
from the games disabled screen go in to the menu the third column from the left
the entry above turn game on & off will bring the setup menu for each game
the denominations on the right side and the percentage of each game on the left if available

hope this helps doyle

[danatlvc]

I tried that in the beginning, but it's blank with no games showing to turn on or off. I also tried other game chips of the same that I have & it still shows no games to turn on or off?
 Do you or anybody have a Gamblers Game Game Maker & if so when you clear does it give you the option for denominations & for each game etc. like a standard Game Maker?
The reason I orginally went to do a clear is because it was starting to act up with a few buttons not working & then I would have to turn games on once in a while upon turning it on
Thanks, Dan

[Tacman]

Recently another member had problems with a Gamblers Choice with clearing. Below is a link to the post, hopefully this will give some insight. Also the Debug/clear chip gets removed after the clear and can be replaced with another game, it is not left on the board, correct?

http://newlifegames.com/nlg/index.php?topic=1160.0

Dan (tacman)

[doyson49]

on the united coin software after clearing and setting up the eeprom and calibrating the touch screen
with the games disabled on with the dbug chip in p10 with the door open go into menu under
the configuration select the select play options there you can enable the denom and % of each game then exit back
to the main menu and go to turn on/off game selection and enable each game
then you can remove the dbug chip
you can not use p10 for a game  you have to have the dbug chip to setup the game
doyle

[danatlvc]

AWESOME!!!
That did the trick
Great learn
Thank You