I found this on another post....
7.3 Progressive
The progressive submenus can only be configured and/or displayed when the paytable program supports progressive awards.
This note indicates to me that perhaps your SB version doesn't support progressive configuration...post your SB and i can check the PAR sheet if you don't have it.
7.3.1 Controller Select - Displays a list of levels to be configured. For each level, the operator must select from a list of progressive types (e.g., none, SAS, link, and standalone). NOTE: Before the operator can select SAS as the controller, the SAS group must be set.
7.3.2 Progressive Display - Setup Although this option appears, it has no affect.
7.3.3 Stand Alone Setup - This page determines the limit amount, the current amount, the add percentage, and the base amount for each progressive level.
7.3.4 SAS Progressive Group - This page sets the SAS progressive group. If set to zero, SAS progressive capabilities are disabled. The operator can set the SAS group from 1 to 255.
My machine is (7.3.4) is set to =000. Is this why it is not working? If I change it to a number from 1 to 225, what does this do?
Thanks,
Dave
Corrected small print