1
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.
« Last post by David Walz on Today at 08:22:29 PM »The manual will have the dipswitch settings for the MPU. But I don't think that is your issue. BV stopped after receiving a different MPU. I think the gray wire has to be moved to work with the board you now have. Not sure which pin it has to go to?
Right now this is where the gray wire is located. This has become a nightmare.