91
To answer your photos, all the LEDs look ok. The chips look alright physically. The ex-Varta battery area of the MPU looks okay on the surface.
The only that bothers me is your statement that the machine is " then impossible for three days it remains blocked." What do you mean by "blocked", and why 3 days?
92
« Last post by SandsMan on May 02, 2024, 11:09:32 AM »
Seeking reel tapes for my S2000, 3-reel, 5-line, 5-credit, Triple Red Hot 7 machine. Reel tape PNs: 92036900 92037000 92037100
93
« Last post by Newbooty on May 02, 2024, 11:07:48 AM »
Hands down for fun of play INVADERS PLANET MOOLAH seems to be the best BB3 game. I still think Wonka has great graphics and is polished, but moolah keeps my attention.
94
« Last post by edtruman on May 02, 2024, 09:51:49 AM »
Thank you pokie3 for your help and advice !! It turned out to be DIP Switch settings on the IO board that were incorrect Money setup was also causing problems... needed to be set as Dollar Coin , nickel per credit Jurisdiction that worked was Oregon, Variation 2
95
« Last post by KAD on May 02, 2024, 09:36:27 AM »
Thank you Rick.
96
« Last post by idesign on May 02, 2024, 09:18:49 AM »
Studio 777 is SOLD. Others still available
97
My guess is a couple of originals and the rest are chinese replacement buttons.
哦,那些中国人!
98
Hello! I recently acquired this slot and I am looking to find out more about it, model/year/value? If there is anything you can tell me that would be great. I wanted to find a user manual, there are a few functions that are not working correctly that I wanted to try and get fixed. Thank you for your time.
Along with what wolftalk just wrote to you, there is a LOT of information on the Bally on this board. Simply scroll up slightly, add "809" in the search box and change the search area to "this board."
99
« Last post by JG307 on May 02, 2024, 09:12:11 AM »
My backplane board does not have words on it either. 3902 13" GameKing cabinet. There is an 8-pin port labeled J12. Is this Netplex? I could not find my particular machine in the NLG File System (I am a contributing member.)
No. J2 on the top of the motherboard is the Netplex connector.
Looks like I'll have to disconnect and remove the I/O tray (is that the right word for the tray above the MPU tray?) in order to access J2. Seems scary but I'm guessing it's no big deal?
100
Any way you can post a video? Even if only to youtube, it will let us see what it is doing. Right now my mind is going to power supply acting up. Or you have a door hinge that is allowing it to move while pressing the button. I had a vision doing weird things once and traced it to vibration. Taping the door, reels spinning etc. Found that the MPU was not seating well in the MB. Replaced the MB and never a problem since
|