21
IGT S and S-plus Reel Games / Re: Installed new S+ MPU board now there is no sound.
« Last post by hornetgod13 on Yesterday at 01:58:15 PM »I'm using Sp1137. Sounds like it needs the U49 chip.
Welcome to the NewLifeGames.com message forum!
|
21
IGT S and S-plus Reel Games / Re: Installed new S+ MPU board now there is no sound.« Last post by hornetgod13 on Yesterday at 01:58:15 PM »I'm using Sp1137. Sounds like it needs the U49 chip.
22
IGT S and S-plus Reel Games / Re: Installed new S+ MPU board now there is no sound.« Last post by RB on Yesterday at 01:51:07 PM »U18 is not needed for home use. U49 is a sound chip. Not all SP chips utilize the dip switches. Some have sound settings in the menu like SP1271 for example.
23
IGT S and S-plus Reel Games / Installed new S+ MPU board now there is no sound.« Last post by hornetgod13 on Yesterday at 12:37:49 PM »I ordered and received a spare 10 mhz S+ MPU board. I went to tested it on a known good machine. I installed the reel chip and went through the clear process and than put the the SP chips in and it booted up and plays but it has no sound. Even when I did the reset there was no ding. I have checked/adjusted the volume wheel and the dip switch #3 in on and off settings. It does have reel stop sounds from the handle solenoid but no coin drop, winning or reel spin sounds. I put my original known good board back in and I have sound so there's something up with this board. Do you know what it could be? The board itself looks like it's missing a couple chips (U18 and U49) but I don't know if they're relevant or not too sound. Any help or guiance would be greatly appreciated. 24
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Yesterday at 11:07:57 AM »I have a worn part on the handle pull, its a stop piece. It would be awesome to locate another one. Alan at K-Lar has been a great provider of parts and knowledge. Hopefully I don’t wear out the welcome mat. 25
LCD and CRT Monitor Repair Tech Support / Re: IGT 701 Draw poker with video problems« Last post by Asurber on Yesterday at 10:06:38 AM »It works with the new board! Any way to adjust the volume? I've tried to find it in the manual but no luck...
26
IGT S and S-plus Reel Games / Re: Unusual game it s plus« Last post by shortrackskater on Yesterday at 10:04:01 AM »Post a close up pic of the Game and Reel Prom chips also please. Please post photos of the game as requested. 27
IGT S and S-plus Reel Games / Re: Need Help fully understanding Changing a Game from Double Diamond -Balloon Bars« Last post by knagl on Yesterday at 09:31:05 AM »Think of the GAME (SP) chip as the operating system of the machine (Windows XP, Windows 7, Windows 10, etc.). Each version of the SP chip supports certain game types. So long as your currently installed SP chip supports the new game type, you don't have to change it out.
Even with an unlabeled chip, you can determine the current chip numbers in your machine with the instructions found on this page. 28
Found on eBay, Craigslist, or other similar sites / Re: IGT G20 for 4K« Last post by shortrackskater on Yesterday at 09:27:02 AM »This is why I encourage all to post a PHOTO from the link.
29
Found on eBay, Craigslist, or other similar sites / Re: IGT G20 for 4K« Last post by rickhunter on Yesterday at 09:19:19 AM »G20 can be MLD or Non-MLD. As far as I know, there is not button requirement for any game type. Most of us just like the OLED Edge-lit buttons because they look great and some even have game specific bling.
30
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by shortrackskater on Yesterday at 09:19:13 AM »I have a worn part on the handle pull, its a stop piece. It would be awesome to locate another one. Don't forget our sponsor page. I "arrowed" the ones that might have it. You can also put a WTB ad in the classifieds. |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |