select WAMM or IPC

[vegasparties]

I have an S2000 Vision and can't clear select Wamm or IPC  How can I clear them to bring the machine up

Thanks James

[therockinelvis]

Did you clear the machine? Or just out of the blue message? Are you trying to set up a progressive? More info. please

[Stayouttadabunker]

Change SG chips to SG000363's.




***update****

Disregard my answer above...I overlooked the fact that Vegasparties had a Vision game installed.

[Tilt]

363's don't support Vision games.

[therockinelvis]

Visions like sg248s and sg380

[vegasparties]

Did you clear the machine? Or just out of the blue message? Are you trying to set up a progressive? More info. please

The machine was cleared and I used a key chip to program it.  The GAME CHIPS ARE 262"S   everything WAS FINE UNTIL THE MACHINE CAME BACK UP AFTER I FINISHED WITH THE KEY CHIP.  iT SPUN UP then came up with the wamm msg.

[therockinelvis]

Did the machine ever work with 362's? Why did you have to clear it? What vision title?

[BettorSlots]

Key chip the machine, go to that setting under Key Chip Config 1, and select IPC.  That should clear the error after you exit and open and close the door one to two times. 

[vegasparties]

Key chip the machine, go to that setting under Key Chip Config 1, and select IPC.  That should clear the error after you exit and open and close the door one to two times.

   It worked spot on.  THANK YOU, THANK YOU, THANK YOU !!  I am an old S/S+ guy and every once in awile an S2000 comes up which is always a challenge for me.
I have some  clear chip and key chip set up procedures but they aren't accurate once you get into the 7.1.1 denom area.  They don't follow the programming sequence in the machine and it takes me a time or two to get it right.   Do you have or know where I can get some better set up procedures.  Once again thank you and have a wonderful Thanksgiving, you have made mine great.
James