IGTS+ 5X Pay Slot Machine After a battery replacement, clear/set chips and a lot of slot machine education (mostly via Newlifegames, thanks) I have found the issues that I was pressured into looking at for a good friend. Never saw the inside of a slot machine or never played a slot machine so it was a journey.
The door optics problem had a bad switch in the dollar bill door that did not close correctly with the door (fixed with a wire cutter and a wire nut to complete the ground path) and a flaky coin-in optic board ( I thought, replaced it).
So the machine worked, well some of the time. Open the door and shut it and it might work or it might not. Wiggle the 45 wire bundle between the door and the cabinet and it might come back to life. Everyone out there knows what the problem is now.
So to make life a little easier in my wire tracing, I have been trying to find a pinout diagram for connector J/P-203. In fact it would be nice to have pinouts for 201 and 202. Can’t seem to find them in the manuals I have acquired, again mostly from Newlifegames forum.
Would appreciate any links for the pinouts. I know I can do the wire tracing the hard way with colors but I have traced wire bundles in the past (auto stuff) and it’s a lot easier with pin-outs. Thanks again for all the virtual help understanding these complicated devices and the documentation of many knowledgeable members explaining how they work. Could not have done it without you.