Removing power supply

[grumpy]

Have to remove my power supply in order to see if it is causing the problem I am having. Got the knurled handle loose but cannot move this thing left or right. Is there an other to remove?? Thanks

[therockinelvis]

It should slide to the side with the knob that had it screwed in. That knob/screw is sometimes hard to turn. A stubby Phillips helps. Once it slides away from the plug it will lift up and tilt away from the rails.

[grumpy]

Worked like a charm Thank you very much. Grumpy

[Brokenwizard]

I'm having the same problem. The know turns easily counter clockwise but clicks like it's skipping teeth. Clockwise it will not budge. I'm assuming it a regular screw and counter clockwise is the out position, How do you get this to loosen up?

[qbert]

You need a stubby phillips head screw driver. Place it in the center of the knurled handle and turn counter clockwise until handle is very loose

[Brokenwizard]

Thanks Finally got it. Now I'm getting door MB open. That's the main door Correct? I thought I saw a note here on how to permanently
bypass the door optics. Guess I'll go looking for that. Thanks for your help with the %$#@%screw

[cowboygames]

Check your door on the cashbox housing and your belly door to make sure they are closed toght

[buybestslots]

lately we been bypassing belly door sw and cash box door  sw , saves a lot of phone calls from home owners , a few less things to go wrong