5 reel S2000 CLEAR AND SET UP HELP w/ enhanced MPU

[drfreeze1739]

HELLO


i have the enhanced mpu board on my s2000



i replaced the battery on the MPU BOARD.


I have the clear chip and 2 key chips. ( clear 97 ) (key 17 and 31)


i put the clear chip in the stepper base slot  and i get 2 green lights and 1 amber light.


i pull out the clear and put back in the sb chip and go through the steps it says on the lcd.


then ipull out the mpu  board again and i put the key 17 in and all the lights on the mpu board come on with a flashing red one.


i do a reclear again and then use the key 31 and i get 2 green lights on the mpu board and no other lights.


i try to go into the the config and i can not change anything..


the lcd just say missmatch


any help please...

[drfreeze1739]

pics

[buybestslots]

you have a r board  those clear and keys won't do anything for you  need a r board boot chip that goes where  boot chip is you don't touch base chip

[drfreeze1739]

Ok. I was told wrong then.. so I just bought these clear and key.. damm... dose any one have any for this r board I'm working with right now.. please let me know.. pm me and I can buy them.. thank you..

[RB]

RBK00001 will do the trick. & it does go into the boot chip socket instead of the base chip socket. RBK00001 is a clear/key combo. Yes I have one. PM me..........Ron

[drfreeze1739]

JUST PM YOU..


THANK YOU..

[drfreeze1739]

ok.. i got the RBK00001  clear/key combo.  chip..
[/size]
[/size]
[/size]now what is the next steps on doing a clear and setup on this machine to get it up and running.
[/size]
[/size]

[drfreeze1739]

Thats weird.. It micro sized it self..
I got the RBK00001  clear/key combo chip.
I have never used one of these chips before...
i put it in where the boot chip goes and put it back in the machine.
it came up and asked to clear ram and i did, then clear eprom and i did, then set key chip and i did,
then i put the boot chip back on the mpu board and put it back in the machine.
went through and cleared the errors like it said to

then it came up in the key config 7

now what is the first thing to set in the key config???

How do i set it up right???

i tryed it once on my own and it wont let me set the domination or the accounting domination..

[buybestslots]

hit spin button a few times till both far left buttons lite   also make sure the set max bet in demo  mode  to match your buttons also everything has to get locked in with max bet button

[drfreeze1739]

I tryed it once more again before i read you responce..

In the key 7 config i didnt see any where to set max bet in demo  mode  to match your buttons...

when do i  hit the spin button a few times???

I can enable and disable stuff and set it to upright.

[drfreeze1739]

Ok. I think i got it now..

i was able to set it up so far..

what do i put for coin domanation?

do i just put 0 because it has multi domination??

i all ready set up the multi domanation. 0.1 0.2 0.5 0.10

[RB]

I think I would put 10c since 10 is divisible by all 4 of your player denoms.

[drfreeze1739]

yea you have to put something or the machine wont work..

I got it working with 0.1 cent

but i cant get the muti button domination to switch to 0.2 0.5 .010

mabey there is a step im missing..

i have never done a mulit domination machine before..

[drfreeze1739]

I got it going,,


thank you all for your help...


it works great now..


it even prints the tickets....


wow awsome...


you guys are great help..