New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/
« previous next »
Pages: [1]   Go Down

Author Topic: Vision Topper  (Read 2918 times)

0 Members and 1 Guest are viewing this topic.

Offline Haywired

  • Formerly Triplediamond
  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 328
  • Reputation Power: 23
  • Haywired New User barely matters.Haywired New User barely matters.
  • Gender: Male
  • NLG
Vision Topper
« on: July 27, 2015, 10:14:13 PM »
I have a vision machine that I have been wanting to install a oval topper in it...currently I had the monitor and harness removed to play non vision games .....I have read a post on how some hooked one up using some existing wires to power the unit...My topbox doesn't have any of these wires to do so, is it possible to make a harness to plug into a dist board and run the topper ....Here is the post I was referring to

http://newlifegames.net/nlg/index.php?topic=1668.0
Logged

Offline Haywired

  • Formerly Triplediamond
  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 328
  • Reputation Power: 23
  • Haywired New User barely matters.Haywired New User barely matters.
  • Gender: Male
  • NLG
Re: Vision Topper
« Reply #1 on: July 27, 2015, 10:20:08 PM »
Here are some pics of the top box
Logged

Offline therockinelvis

  • Capes are not just for Super Hero's
  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2579
  • Reputation Power: 173
  • therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Vision Topper
« Reply #2 on: July 28, 2015, 02:28:58 AM »
in the center is your sound amp. to the right there is an indent and should have a plug. The wiring you removed with the monitor should have plugged in there and 12vdc and 24 vdc. orange+ and orange with black stripe- are 24vdc, and red+ and red with black stripe- are 12vdc
Logged
Thank Ya Thank Ya Very Much.

the rockin elvis

Offline Haywired

  • Formerly Triplediamond
  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 328
  • Reputation Power: 23
  • Haywired New User barely matters.Haywired New User barely matters.
  • Gender: Male
  • NLG
Re: Vision Topper
« Reply #3 on: July 28, 2015, 08:22:48 AM »
Jim,
Bottom left cutout of top box has a 6 pin plug ...wires go up to top of box for the fan,candle etc this is the one you are refering to correct ....
if so this would be the plug for the topper correct
Logged

Offline therockinelvis

  • Capes are not just for Super Hero's
  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2579
  • Reputation Power: 173
  • therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Vision Topper
« Reply #4 on: July 28, 2015, 05:14:31 PM »
The one I'm talking about is on the right side. Looks like you have speakers inside the top. If you have this place, you can get a wire harness and power dist. from idesign or blueridge.
Logged
Thank Ya Thank Ya Very Much.

the rockin elvis

Offline Haywired

  • Formerly Triplediamond
  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 328
  • Reputation Power: 23
  • Haywired New User barely matters.Haywired New User barely matters.
  • Gender: Male
  • NLG
Re: Vision Topper
« Reply #5 on: July 28, 2015, 06:49:08 PM »
No luck on the right side ...no 10 pin plug, i will have to chase the wires but there is a 12 pin plug not in use on the left with the wires you spoke of ...is that possible
« Last Edit: July 31, 2015, 08:14:13 PM by Haywired »
Logged

Offline therockinelvis

  • Capes are not just for Super Hero's
  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2579
  • Reputation Power: 173
  • therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Vision Topper
« Reply #6 on: July 30, 2015, 02:38:33 PM »
OK, here is something you can do. The wires going to the ballast are 24vdc, you can tap into them before the ballast to power your fluorescent in the topper. The red(positive) and red with black stripe (negative)going to your sound board are 12vdc and will power the chase lights. The only other way is to get 3-12vdc power supplies like battery chargers etc. Use a power strip to turn them on. The first 12vdc use for chase lights. The second 2 wire in series by taking the positive wire from 1 and connecting to the negative wire from the other, then there will be one positive and one negative from each power supply and will make a safe 24vdc
Logged
Thank Ya Thank Ya Very Much.

the rockin elvis

Offline Haywired

  • Formerly Triplediamond
  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 328
  • Reputation Power: 23
  • Haywired New User barely matters.Haywired New User barely matters.
  • Gender: Male
  • NLG
Re: Vision Topper
« Reply #7 on: July 31, 2015, 07:21:40 PM »
Jim,
If I install a Dist. board.. tap into the power from the amp and power the dist. board with that ...would that work... then all I would have to do is plug the topper into the dist. board.
But on the other hand if I ever change the machine back to a vision ....the harness to the LCD would have to plug back in on the plug on the right side that is currently running the amp board ..... :Scratch-Head:
Logged

Offline foster

  • The S2000 Guru
  • Sr NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 409
  • Reputation Power: 29
  • foster New User barely matters.foster New User barely matters.
  • Gender: Male
Re: Vision Topper
« Reply #8 on: July 31, 2015, 09:10:32 PM »
I would be very careful using power from the 12 pin plug on the left side or the 9 pin as well or motherboard damage may occur

Yes you can use the fan or the ballast power for the topper ballast and tap into the amp harness for the LED board.

Be careful with the polarity on the LED board it does not like reverse polarity at all.
You will blow the fuse and a very hard to find +5VDC regulator. its rated for 50mA and unless you want to do SMD rework be careful.


Logged
Coca-Cola and Slot Machine Addict

If you find this site helpful
Please Consider Making a Donation to help defray the cost of hosting and bandwidth. OR Subscribe to NLG

Offline therockinelvis

  • Capes are not just for Super Hero's
  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2579
  • Reputation Power: 173
  • therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!therockinelvis Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Vision Topper
« Reply #9 on: August 01, 2015, 04:35:58 AM »
Logged
Thank Ya Thank Ya Very Much.

the rockin elvis
Pages: [1]   Go Up
« previous next »
 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**


           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.

New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442



Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:


This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal