IGT PE nonplus switch lamp

[comal5]

I have a IGT players Edge non plus poker machine. a couple of the switch lights are out how do the switches come apart to change the lamps

[Stayouttadabunker]

Open the door and look under the button deck on the door.

Look carefully and see how have to pull out the switches out and away from the button housings...and DON'T pull on the wires to do this!

When you do, you will see the lamps that you want to replace.


Warning ....you might want to first turn the machine's power switch off....haha

[WESTCOAST]

Hello there Wescoast I have a question about my IGT Pe non plus poker machine how do you change the switch light lamps. I don't want to break the switch trying to get the bezel off to change the lamp

The original light are removable without taking out the whole switch   If I remember correctly you can turn them counter clockwise and they come out. I’ll get a pic of it tomorrow morning.

[WESTCOAST]

I believe these are the originals. Hope it helps.

[comal5]

Thanks so much. Do you happen to know what the part number of the lamps is

[Jim]

I believe those  are #86 bulbs,  7 vac is provided by the machine to power them,  newer #86 bulbs have a slightly larger width at the base of the wedge, so for the older style bulb sockets I order the E-86 bulb.  I usually get them from Jackson Lighting  in Jacksonville Florida?

hope this helps

Jim

[WESTCOAST]

The bulbs them come out of the housing. I’ll check them today. I know they are 6volts.

[Ken]

Yes, they are wedge bulbs.