IGT Barcrest 21 Gambler PAR Sheet

[SlotMachine4You]

Wondering if anyone would have the PAR sheet for the 21 Gambler. 

I currently have a WTB ad for chips and strips and in my quest to locate them, was asked if I had this info.

It is a 3 coin, single line 5 Times Pay theme.

Thanks,

Mike

[br549autosales]

I have a 21 Gambler, of you need info on it I can get it for you

[SlotMachine4You]

Thanks.  I was able to obtain the PAR sheet. 

Have a question on the top VFD display.  I understand it plugs into the netplex. I'm missing the cable. I have one that will plug into the back of the display but the other end is different.  I posted some pic's here:

http://newlifegames.com/nlg/index.php?topic=7650.msg40857#msg40857

Can you post a of your netplex harness so I can duplicate it?  Would be much appreciated.  I Don't want to mess up the pin order.

I'm looking for reel strips too and noticed they are identical to a 5 times pay except for the special symbol on the 3rd reel for the 21 gambler.  I ordered a set from Rudy's so I'm 2/3 of the way there.

Mike

[br549autosales]

I will take a pic for you sometime tomorrow and post it

[SlotMachine4You]

Thank you. That will be a big help.

[777sizzler]

Mike, As far as the harness goes for the aux. top box display they are all the same on the barcrests, That being said rob and many others have these, just a matter of the pin-out -I know. I prob. have one left around here but would have to dig. Much easier for someone to slide the top glass off, un-plug and snap a couple pics for you. That harness plugs into the netplex on the back dist. board in top box.

[SlotMachine4You]

Yes. A picture would be most helpful. I'm guessing that I could just duplicate the pin order on the other end of the harness but I'd like to be sure before applying power.

[777sizzler]

Yep, Worry about both ends -wire colors don't matter-pin-out does.