1
JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators / Re: WBA-13-SS RS-232 Board
« Last post by RB on Today at 02:12:39 PM »Rev C or E doesn't matter. I have one. PM me if interested.
Welcome to the NewLifeGames.com message forum!
|
1
JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators / Re: WBA-13-SS RS-232 Board« Last post by RB on Today at 02:12:39 PM »Rev C or E doesn't matter. I have one. PM me if interested.
2
IGT S2000 and Vision Games / Re: S2000 Chip?« Last post by 61Wally on Today at 01:42:07 PM »Thank You So much. I will try to get one ordered.
3
JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators / Re: WBA-13-SS RS-232 Board« Last post by KNNSIN on Today at 01:36:43 PM »I can find a Rev. E board same part number...looks like it will fit the WBA-13-SS. Would that work?
4
JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators / Re: WBA-13-SS RS-232 Board« Last post by sixcardmark on Today at 01:33:10 PM »Here's the part number: JCM WBA-12/13 RS-232C REV C BOARD P/N 300-100038
5
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTB Aristocrat MK6 Machine« Last post by jakah440 on Today at 01:19:43 PM »where are you located?
I have a MK7 Viridian for sale https://newlifegames.com/nlg/index.php?topic=41592.0 Justin 6
JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators / WBA-13-SS RS-232 Board« Last post by KNNSIN on Today at 01:01:13 PM »I have a Bally GameMaker V7200 that I'm looking to install a WBA-13-SS Bill Validator in. What is the correct RS-232 board and where can I find one?
7
General Chat, Slot Shop **Tech Talk** Welcome wagon and other stuff. (Off-Topic Post Welcome) / Re: NLG WELCOME WAGON« Last post by ninjanick on Today at 12:11:51 PM »Welcome to the forum Ed! There’s a lot of useful info here, and I as well wish I had found this community sooner
8
Aristocrat Video Gaming Machines / MK6 Debug port?« Last post by ninjanick on Today at 12:08:43 PM »From the MK6 service manual:
10.4.17 In-Circuit Emulator (Not fitted) To meet the requirements of jurisdictional authorities and to assist programmers in debugging tasks, an In-Circuit Emulator (ICE) facility is provided to enable the visibility and control of the SH−4 processor resources, such as registers and memory contents. The ICE functions are established when the JTAG connector, a 14-way DIL header, is fitted to J8. The connector is compatible with the Hitachi User Debug Interface (Hitachi−UDI) and provides an interface that conforms to JTAG, IEEE 1149.1 and the IEEE Standard Test Access Port and Boundary-Scan Architecture. The SH−4 (Model SH7750) Hitachi−UDI does not support boundary-scan but does enable emulator connection. The Hitachi−UDI uses six pins to provide the serial transfer protocol conforming to the JTAG specification − TCK, TMS, TD, TDO, TRST, ASEBRK/BRKACK. Just out of curiosity, has anyone tried playing with this? 9
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Today at 11:59:50 AM »Interesting pic - normally there are 5 resistors. I removed 4&5. I was told to use them temporarily and it got me through the work on the machine until the new ones came in last Saturday. 10
IGT AVP (Including G20,G23) / Re: Main Door Switch Issue G20 with Static Button Machine« Last post by nlosure on Today at 11:57:45 AM »So I had a short causing the issue, so if anyone has problems with this in the future, apparently a short can trigger the main door to show it open even when it is not.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |