Bally Cabinet parting out

[Jim]

This used to be a Summit Machine, all those parts are gone.  What remains is a Bally 1090 cabinet, hopper, all parts for 25 cent, motor, plug, pinwheel,shelf wheel, knife, agitator, etc.   set of door hinges,  coin in chute,   handle and handle assembly, and finally the power transformer.  also have the door latch assembly  and lock bar. lock bar SOLD. 

Let me know what you need!  I just went to the box store, slot machine isle, and they didn't have any of these parts available.   

The reel glass chrome bezel and the belly glass  chrome frame and light fixture have been SOLD.


Jim   

[Amechanic]

Jim,  What size is the chrome reel glass bezel, corner to corner on the top, and then top to bottom. I'm restoring a 5 reeler and I think its the same size as the 1090.. Also do you have the belly glass chrome piece, and what's its size? My 5 reeler is all pitted from sitting in a damp basement..

That Summit cabinets super clean. Factory fresh..

Thanks, Gary

[Jim]

Gary,   here is a link to what those parts look like!   I'll get the measurements for you.


http://newlifegames.com/nlg/index.php?topic=9538.0




Jim

[Jim]

Gary ,  the top reel glass chrome is 21 x 12 1/8 inches.    the bottom glass frame is  20 3/8 x 8 1/8.

Jim

[Amechanic]

Those measurements work for my 5 reel machine.  I can use the whole belly glass light fixture minus the glass, and the reel glass chrome bezel with coin head..
let me know the cost of both pieces..

Gary

[chedderboy]

Is this the same size as the Bally 873 series door?  I need all the door lock/latch parts from the door lock cam out.

[Jim]

I would imagine that they would be the same, I am not sure, if someone has a 873 and could post the length of the lock bar.  I do have the lockbar available.

I will measure it tonight and post the length and hole pattern.


Jim
   

[Jim]

the lock bar is 18 "  long.  from the top the screw holes are at these dimensions. 1/4"   3 3/4"  6 1/4"  14 1/4" 17 3/4"    here is a picture.     Jim