Title: Re: Unknown to me, CEI machine, what model is it?
Post by: doyson on September 04, 2010, 10:36:14 AM
Hi, your CEI game is a 904 game from the pictures it is a hold game
and the program is parable v.24.0 the hold version of 23.9
hope this helps
________________________________________
Title: Re: Unknown to me, CEI machine, what model is it?
Post by: Jackpot on September 04, 2010, 12:04:11 PM
GREAT STUFF DOYSON! Thank you!, now I know at least that it is a model 904, so now I am looking for a manual to cover this, and maybe a good MPU for it. I looked for a new ram for it already, CMOS Ram number: (Japan 4A1) HM6116LP-3 but this ram chip is obsolete. I thought maybe a new Ram would help it some. It was working when stored, but then it was stored in a damp trailer for years, so now it's having big problems. I put a new battery on the MPU and it tries to have a almost complete image on screen, but freezes up, and then chops up. Thank you for taking the time to help. Rodger
________________________________________
Title: Re: Unknown to me, CEI machine, what model is it?
Post by: doyson on September 04, 2010, 03:27:16 PM
Rodger, You might try removing all the Program chips and cg chips and reinstall them, and also check the sockets. We had some boards that had cheap sockets (only had contacts on one side).
________________________________________
Title: Re: Unknown to me, CEI machine, what model is it?
Post by: Jackpot on September 04, 2010, 05:35:38 PM
Thank You very much for thi information! I'll give all this a try asap. I don't have this machine here but when I go back to where it is I'll try all this and have a look at those sockets. Maybe even touch them with the iron if you think these might be known for cold solder joints.