Still working on this one I took in. Looks like I'm missing a wire harness that goes to the recieve ticket here display on the door picture attached.
Issue I'm still having after changing the module in the power supply and wiggling the cable I was able to get the display to show the 88ff code. After I got the power up the display won't show anything now. Everything seems lit up except display ,buttons,coin mech, and bill val. I figure the bill val and coin mech will power after full clear and setup. I've checked everything I can think. Any suggestions on the display? Maybe bad mpu? I'll need the harness described above and maybe a mpu. On another note missing the key to the can locks on the bonus wheel. I've checked all my spare keys and don't see any numbers on the locks, rather not drill them out if I can find the key as well. Thanks for any help with this one