Need PE+ door plate, hopper relay, and coin in chute

[pinballlarry1]

Hello everyone,
New member, first post, be gentle.  I am trying to revive a IGT Players Edge Plus standup game that has spent 10 years in a garage after 12 years in a local casino.  Unfortunately it came from Montana with the receipt printer and no hopper. Not knowing all the differences up front I thought it would be a simple repair.  After getting the parts list, wiring diagrams and a working coin hopper, I rewired several thing and it is getting closer to functioning.  I still need 3 items to install for the hopper to work:
1= IGT#655 903 00, PANEL, ASSEMBLY, 50MM, LOWER, 60 HZ, PE+ . this has the fluorescent light and has cutouts to mount the coin chutes. FOUND
2= IGT#573 263 00 CHUTE, COIN-IN. Mount on the above panel, directs the coin from the comparitor into the hopper. FOUND.
3= IGT#454 041 90 RELAY, SSR, 120/240VAC, 5 AMP. Solid state relay to power the hopper motor. FOUND!!

If you can provide any or all of these parts, I need them shipped to zip 59901, I can transfer via PayPal.

One last question, can anyone tell me what switches 22 and 23 are? the wiring diagram shows them wired to the motherboard J3, pins 39 and 40. My door open detector is wired to pin 39, not J13 pin 20.
Thanks to everyone who helped with the parts!

See my posts over in PE+ video poker for a detailed account of how I got this game to play!!

LarryL

[slots4home]

I saved this pe door awhile back and I think some of the parts on on here
Pm me if you see your items

[slots4home]

Pm sent