Author Topic: IGT S2000 instal 1st gen netplex ticket printer (Read 2058 times)

Cashen87 · « **on:** November 27, 2018, 03:33:44 AM »

Hello. I have get a 1st gen netplex ticket printer to my S2000. I wondering where this connection cabel goes to be instaled in the machine?

Nurbo · « **Reply #1 on:** November 27, 2018, 10:45:54 PM »

Hello

Cashen87 · « **Reply #2 on:** November 28, 2018, 01:09:41 AM »

The ticket printer are in the door. So i stil need the netplex wire to get it to work?

Nurbo · « **Reply #3 on:** November 28, 2018, 01:24:18 AM »

Absolutely.

You need netplex and power.

Cashen87 · « **Reply #4 on:** November 28, 2018, 01:58:43 AM »

I see. But this 2 wire on the ticket printer. 1 small and 1 big one. What are they for?

RB · « **Reply #5 on:** November 28, 2018, 06:33:51 AM »

See pic. Connector goes here. Small one is not used. Be sure power is off when connecting.

Cashen87 · « **Reply #6 on:** November 28, 2018, 07:18:52 AM »

OK. Only the big connector. So i don't need this netplex harness to get i work? I always turn the power off when connecting.

RB · « **Reply #7 on:** November 28, 2018, 07:22:12 AM »

The additional harness is not needed unless you are connecting it inside the top box to a power distribution board.

Cashen87 · « **Reply #8 on:** November 28, 2018, 07:40:47 AM »

Aha. I have the ticket printer on the side of the reels.

Cashen87 · « **Reply #9 on:** November 28, 2018, 09:06:17 AM »

The big connection on the ticket printer goes to this contack?

RB · « **Reply #10 on:** November 28, 2018, 09:14:00 AM »

Cashen87 · « **Reply #11 on:** November 28, 2018, 09:26:46 AM »

Thanks for all help

News: