I got a new 3M touchscreen from Betson Enterprises for my 17" Game King Ceronix LCD [1495].
There's was a broken black wire on the 5-pin connector that goes from the NOVRAM interface board to the 5-pin touchscreen ribbon cable.
I forgot to mark down the wire colors on the black 5-pin Molex before I pulled them out to replace the pins with new ones.
Now it's like trying to figure out what the 5 wire combination is.....ugh!!!
Can anyone give me the wires colors for this Molex that plugs into the ribbon cable?
Thanks!
The 5-pin wire colors I tried are...>>>
Pin-1=Black
Pin-2=White
Pin-3=Brown
Pin-4=Red
Pin-5=Blue
When I go into the screen calibration, after about 4-5 touches on the "Dot", it acknowledges.
When I draw on the screen, everything is 90 degrees clockwise.
For example...If I touch at 12 o'clock - it draws at 3 o'clock sideways.
Link to video here...>>>
https://youtu.be/H8S5tzfqqdQ