I inherited a broken .25 double diamond 3 reel slot machine with the dreaded display NETPlex error. Through searching this forum I was able to try an assortment of fixes including new varta and cmos batteries, new vfd, power supply, mpu, and the culprit..... the backplane board (the mpu and net plex data connections plug into it). Any way after all that I am now past the net plex error. Now the system self rests, reels test spin, and am getting a door closure M and printer comm error. I’m assuming I need to disable the printer so I tried a key chip 17 but instead of amber lights I get all the lights including the red blinking one.
I hope I just need a different key chip. 31 or 45 or what does anyone reccommend.
It is a 25 cent double diamond with speakers on the sides. Mpu is a 1270 with legacy board add on. SG00363
SB100054
Pictures included
I’m assuming since it doesn’t have a printer installed that i can just disable the printer as it has a quarter hopper. Also would it be possible to install a printer so that cashouts just use tickets and knowing that I probably can’t use them for ticket in. Note this is purely a for fun machine. No winners or losers here just for fun.
Thanks!