Source for c-73 bulb SOCKETS?

[MashBoss]

I am in need of a bunch of c-73 wedge bulb sockets. I need the kind that are snap-in, not twist-in. I've only been able to find twist-in ones at suzo-happ or ebay but they're too big to fit. I was told the IGT S+ or Bally S6000 may use them. If anyone has any or knows where I can order them please let me know. Thanks.

[Stayouttadabunker]

I don't know if this is what you're talking about....why not post a picture of one?

Here's a link....>>>>

https://www.parts-express.com/wedge-light-bulb-socket-with-leads-5-pack--070-142?gclid=EAIaIQobChMI6fvb8Mib5gIVA2yGCh3YHwDTEAQYBiABEgIoXfD_BwE

[MashBoss]

I don't know if this is what you're talking about....why not post a picture of one?

Here's a link....>>>>

https://www.parts-express.com/wedge-light-bulb-socket-with-leads-5-pack--070-142?gclid=EAIaIQobChMI6fvb8Mib5gIVA2yGCh3YHwDTEAQYBiABEgIoXfD_BwE

See attached for what I'm looking for.


(pic 2 and 3 show the one i need on the far left, with twist-in ones I found online that don't fit next to it)

[Stayouttadabunker]

What are you using them on?
The ones on the right are for slot machines really.
The one you have is rather bigger than the ones we use....almost for like an auto socket.

Is there any ID markings on it?

[MashBoss]

What are you using them on?
The ones on the right are for slot machines really.
The one you have is rather bigger than the ones we use....almost for like an auto socket.

Is there any ID markings on it?

It's for a low production run Bally arcade game. While the socket is taller than the other 3, the hole it fits in is actually smaller - the other 3 are too big to fit in the hole due to their extra plastic where the first one's snap-ins are.

[Stayouttadabunker]

Drill out the hole slightly bigger? lol