@home Tito set up issues(Solved)

[ThirdGenAmusement]

I just received the @home tito board today and hooked it up.  The part of connecting it to the machine is straight forward. However, in the instructions, the items I need to change to the correct configuration, the menus dont completely match/dont have the options listed in the instructions.


For instance, the instructions I downloaded for my S2000 states Cashless Controller:SAS AFT  but mine says EFT SAS Controller.  There are a couple of other option in my menu 7.1.5 but no SAS AFT.


Validation type: system Mode is SAS Validation type:System mode in my slot 7.2.1.1

Voucher redemption: SAS only has an enable/disable in my slot 7.2.3


Voucher Limit:Follows credit limit if available, otherwise follows bill limit is non existent in my machine but believe its supposed to be 7.2.3.2


Also, in the area of primary SAS setup, primary address is 001 but primary channel is supposed to be set to 3 but I only have 1,2,8 and off as options.  3.4.1.1


Hopefully someone can help shed some light on what I may be doing wrong.  i found the IGT S2000 Menu Structure doc within nlg which helped find the settings I need to change but my machine doesn't match the structure/options listed in the directions of the @home Tito.


furthermore, though my printer is enabled in the settings, when I do try to cash out the machine states printer is is unavailable.  It worked prior to the install of the tito board.     



BTW this is the super stepper board if that makes a difference.  The @home Tito board is the 3v  The slot title is 3x4x5x double times pay.








**** Brian with @Home TITO walked me through the set up so its working!  My one piece of advice is to do the clear chip before trying to set this up.  Just need figure out how to adjust my credit limits and this will be perfect!