So I've re-loaded Gems Gems Gems on my BB2 and run into two issues, the first was my button firmware 2.03 bin file now shows as Bad Image when I try to load it, but that resolved by just installing something else first to update the buttons.
The second, and lingering issue, is the machine shows a Printer Open error. Printer will kick out a blank ticket just fine, shows a green OK indication, and will throw a second Printer Open error if I actually open the printer. This is the first time I've actually tried enabling this printer so I don't know if it actually works. Printer is Gen2, setting up as Netplex. Unit will not perform a test print in diagnostics due to the open error. I do not have the correct mounting studs for this printer and have placed a few screws with nuts to hold it securely. Have the same setup in another machine that is fully operational. The ticket bezel I'm using is not the standard bezel. Trying to toss out as much info as possible. Is there an additional switch somewhere that I'm missing?
Any suggestions from the experts? Love working on these things, but far too green to pretend to have any real clue.
Thanks