TOP SLOT = OS or CLEAR
BOTTOM SLOT = GAME CARD
Push mpu ATX switch to the left/off, remove the top card, eject bottom GAME card, put clear card in top slot (TOP SLOT = OS or CLEAR), slide mpu ATX switch to right/on, When the screen displays the message to clear nvram, turn attendant key, wait for the 3 nvram to clear, slide mpu ATX switch to the left/off, remove clear card and replace with OS card, push back in GAME card (bottom). Slide mpu ATX switch to the right/on, wait about 8 minutes to boot up...then you can setup the machine by pressing the reset button.
1. Set clock.
2. Set devices (usually just bill validator, button panel type, and ticket printer)
3. Set denomination/credit
either enable multi denom , or disable multi-denom and if there's a progressive, disable.
Select the game percentage and save for all paytables.
4. Set game options (i.e. max bet and button panel layout)
5. Set your progressive if needed.
6. Set your comm for TITO if needed.
https://www.youtube.com/watch?v=BhnLFt6rBykhttps://www.youtube.com/watch?v=AvbJ3Pu1XA8https://www.youtube.com/watch?v=Qp2Je3wAWOUhttps://www.youtube.com/watch?v=XBYCJSUZR9k