Atronic Sphinx and CC-16D

[BigBird0000]

I have an Atronic WBC Sphinx Machine.
The green light on the CC-16D coin comparitor was not coming on.

When I checked the +12V and the ground wire it was 4.87v
When I checked the +12V against ground, it was +12V. So I temporarily added a wire from a good ground to the comparitor gnd wire, and I am reading 12V and the CC-16D lights up.

1) Does anyone have a schematic of the Atronic display board (see image)?

2) The CC-16D has a GND, +12, and sense. Is it possible to add a switch or something to add free credits?


If the picture doesn't appear, it is also hosted on dropbox:
     https://www.dropbox.com/s/vcemdffvf096jvr/Atronic.jpg

[slottech]

See if this help (see attachment)
You can add credits by setting the machine into free play mode too.

[BigBird0000]

I will take a look at the schematics later on - my 'puter is real slow right now.

How can I put the machine in free mode? I didn't see it on any ot the menus.

[GlobalBrett]

You can access the service game with the door open and push the green button. The Atronic has key on function installed. You just have to enable it.


Cheers

[slottech]

Here you go!

[GlobalBrett]

Ahhhhh!  This be true grasshopper!     me be somewhat rusty on these WBC tings!