I have the chip positions on a 3802 module as:
U4 PXL2
U5 SND1 MM board
U6 SND2 MM board
U8 Base chip
U20 PXL1
GME1 U21
GME2 U5
CG1 U48
CG2 U47
I know these chips go in different positions on the 3902 module. Does anyone have a list of where thay go ?? Thanks for any help.
idylewild1
« Reply #1 on: June 27, 2009, 06:47:13 PM » |
Ron I will try U 8 base chip only fit one place
U 48 CG1 ( 1 of 4 )
U 47 CG 2 (2 of 4 )
U 20 PXL 1 ( 3 of 4 )
U 4 PXL 2 ( 4 of 4 )
U 21 GME 1 ( 1 of 2 )
U 5 GME 2 ( 2 of 2 )
U 22 and U 6 Both chips no window same part number HM628512BLP-7
Ron I just took this info off a working board, hope it helps. Buzz
« Reply #3 on: July 08, 2009, 04:19:59 AM » |
hi here is a layout that i have downloaded from this site a while ago I trust it will help
PLEASE NOTE The notches in the chips are set towards the front of the board and should the same end as the notch in the socket
hoppy