Advantage 5 topper wiring

[61Wally]

Great Evening to All. I’m trying to wire up a poly gone topper to my Konami. I enclosed some pictures of the plugs & board. I know where candle connector goes and I put the 24vac to red/black. The only thing that lights up is the back lighting. I’m trying to get the outside colered lighting to function. I tried researching under Downloads and toppers and was unsuccessful. Any thoughts would be appreciated.

[61Wally]

Here’s the picture’s!!!

[Stayouttadabunker]

You put 24VAC to it? You probably burned it out.
Look closely at the photo I flipped below.
I highlighted something in your photo that is etched onto your circuit board.
I believe it says "24VDC"....that's direct current DC voltage...not alternating AC voltage.

Click on photo below to enlarge if needed....>>>

[61Wally]

My mistake, I have 24vac to it and it lights up the logo. I can’t get the outside ring to go. It came to me in a new box/package, still could be bad. Do Any of the gray wires get jumped or vdc applied?

[61Wally]

24vdc is what I’m using, Sorry mistyped.

[RodneyK]

Probably not much help as I have never wired one of these. But, on the Polygon toppers I have dealt with it took 24VDC and 12VDC to get both parts going. I do not recall what part got what voltage.